Boom Lift License Sudbury

Boom Lift License Sudbury - To operate an aerial boom lift, operators should be qualified through training which could be obtained utilizing both practical training and classroom sessions and by attaining a boom lift license. Instruction must be given with respect to the kind of aerial lift which would be used on the job. A License is required for anybody who operates or works on an aerial boom lift.

Different types of vehicle-mounted aerial devices include extensible boom platforms, aerial ladders, vertical towers, articulating boom platforms, and whatever combination of these kinds.

There are some basic safety rules which apply to all boom lifts. Worker safety whilst inside the basket is a top priority. Workers should have on a body harness and lanyard attached to the boom or basket. Never tie off to an equipment, an adjacent pole or a structure. Employees should stand on the floor of the basket, and never sit or climb on the basket edge. The manufacturer's load limits must be followed.

Lift operators have to be authorized to operate an aerial lift. The manufacturer's instruction manual must be kept in the lift and the operator needs to know all aspects of that specific unit. Operators are responsible for ensuring that safety measures are followed in operating the lift. A daily test of lift controls must be performed. Position outriggers and set brakes (if they are utilized) on a stable surface or on pads. If working on a slope, utilize wheel chocks.

The aerial lift vehicle must never be moved while a worker is inside the basket of an elevated boom, unless they are utilizing machinery which are particularly designed for this. Articulating boom and extensible boom platforms used as personnel carriers must have accessible, plainly marked, upper controls. Except in emergency situations, lower controls must not be utilized to override upper controls unless authorization has been given by the person inside the lift.

Do not wear tree or pole climbers shall while working from an aerial lift.
The insulated portion of the aerial lift should not be altered.
Do check the booms to make certain that it is properly cradled and the outriggers are in the stowed position before moving.
Make sure that lifts being used near or in power lines are di-electrically tested and conform to local regulations.

Click to Download the pdf